VAS Outdoor Transformer FS4000D
Tax included. Shipping calculated at checkout
Shop with trust. Check out our Shipping Policy and Refund Policy for all the details.
This inverter produces 230 V AC; improper use can cause electric shock, fire, or serious injury. Read the supplied operating manual completely before installation and first use, and keep it for later reference. Use the product only for its intended purpose; never operate it in damp, wet, or salty environments, near flammable materials or aggressive vapors, or in areas with an explosion hazard. Do not operate the device if it or its connection cables show visible damage; a damaged cable must be replaced by the manufacturer, its service department, or a similarly qualified person, and repairs may only be carried out by qualified specialists. Observe correct battery polarity and never allow the red and black terminals to touch; reverse polarity damages the unit. Use battery cables with adequate cross-section, route them so they cannot be pinched or damaged, and never touch bare wires. Disconnect the device from the power supply before any cleaning, fuse replacement, or other work on the unit; note that parts of the device can remain live even after the fuse has tripped. Mount the inverter on a stable surface so it cannot tip or fall, keep at least 10 cm clearance on all sides for ventilation, and never cover the air inlets and outlets. Keep away from heat sources and out of the reach of children; this device is not a toy. Do not exceed the rated continuous power and account for start-up peaks of connected devices (see technical specifications and manual). For installation in vehicles or mobile units, observe the grounding and isolation-monitoring requirements described in the operating manual.
REAL SETUPS FROM VAS COMMUNITY
Follow us on our official Instagram profile for more.
SPECIFICATIONS
- Compatible with Simba and Faya sound systems
- Converts 12V DC battery power to 230V AC (50 Hz)
- Delivers up to 4000W output power
- Compact and road-ready (8kg)
- Certificates: Converter, CE, RoHS; E8 production according to DIN ISO 9001:2000
- Suitable for LiFePO4 (lithium), lead, gel or AGM batteries
12V 4000W voltage converter with digital display
DC connection cable approx. 60cm
Operating instructions with wiring diagram
❌ BATTERY NOT INCLUDED!
Tested with a 280Ah LiFePO4 battery. Suitable for lithium, lead, gel, or AGM battery types.
- 5W–20W: Mobile phone, siren unit, USB chargers
- 20W–60W: Audio preamp, headphone amp, Raspberry Pi FX unit
- 60W–120W: DJ controller, turntable (Technics 1210 uses ~11W), CDJ
- 100W–200W: Laptop, audio interface, effects rack
- 200W–500W: 2-channel mixer, active monitor speaker (small)
- 400W–1000W: Amplifier (mid-range, depending on load), active tops
- 600W–1200W: Kick-bin or upper-bass unit (e.g., Simba Kick or Faya Kick)
- 1000W–1600W: 10” or 12” subwoofer units (Simba/Faya)
- 1600W–3000W: Full Faya/Simba rig with preamp, amp, and playback devices
- 3000W–3500W+: Full sound system with multiple tops, scoops, amp racks, and FX
Notes:
- estimated RMS or continuous draw values, not peak
- Consumption can vary depending on the music genre (e.g., heavy bass vs. ambient), volume level, and ambient temperature.
- FS4000D handles 4000W continuous / 8000W peak, so it's built with headroom to safely run even full systems under real-world stress.
solartronics
Friedrichshafner Str. 72a
04357 Leipzig, Germany
vertrieb@solar-tronics.de
